- Concreting in tropical regions, mass concreting such as dams, concreting by pumping in extremely reinforced structures, and concreting of ceilings, columns, and prefabricated concrete parts
MS-1R Superplasticizer
MS-1R Superplasticizer is produced and offered based on modified melamine sulfonated formaldehyde.
MS-1R Superplasticizer is a retarder and, due to this, it is highly suitable for mass concreting as well as concreting in tropical areas. Using MS-1R for concreting with large area and small thickness prevents surface cracks from developing.
MS-1R Superplasticizer is produced according to ASTM C494.
- Instances of use
- Advantages
- instruction for use
- Protection and safety
- Remarks
- Technical specifications table
- Preventing from the development of surface cracks
- Enhancing plasticity without bleeding
- Enhancing compressive and bending strengths
- Enhancing efficiency and durability
- Time- and cost-effective concreting
- Reducing vibration time and easiness of concrete distribution and finish
- Add it to the concrete water equal to 1 to 1.5 weight percent of cement and mix it for 1 to 2 minutes to make a homogeneous and consistent mixture.
- This material is not classified as hazardous and harmful to health and the environment; however, it must not be swallowed or be in contact with the eyes.
- In case of accidental contact with skin or eyes, immediately rinse it with plenty of water.In case of being swallowed, immediately visit a physician.
- This material is not inflammable.
- In case of long concrete transportation distances, it is better to use half of the required superplasticizer at first and the second half when concreting.
Physical state | liquid |
Color | glassy yellow |
Specific weight | ∼ 1.17 gr/cm2 |
Cl– | None |
pH | 8-9 |
Standard | ASTM C494 Type G |
Expiry period and storage | one year, away from freezing and direct sunlight |
package | 20-lit plastic containers and 220-lit barrels |