WP-1 Concrete waterproof admixture (liquid)

The main cause of concrete weakness against infiltration of water and other chemical agents is the concrete porosity and lack of required compactness. The presence of such weaknesses in concrete not only results in water infiltration and seepage from storages and tanks constructed using such concrete, but penetration of chemical agents such as sulfates and chlorides and their combination with concrete ingredients also causes cracks development, and more damage and porosity.

WP-1 Waterproof admixture increase concrete resistance against water and other chemical agents’ infiltration several times by making it more compact, and due to the reduction of the water used in the concrete, prevents from development of voids and fine pores as well as its cracking.

  • Required for all kinds of concrete used in water and sewage ponds, dams and making impermeable concretes
  • In Addition to the enhancement of resistance against infiltration of water and chemical solutions, WP-1 Waterproof admixture causes the increase of plasticity and workability of concrete and enhances its quality and strength due to the reduction of water used.
  • Add WP-1 Waterproof admixture to water used to make concrete as 2 to 3 weight percent of cement and mix it for 2 minutes per cubic meter of concrete.
  • This material is not classified as hazardous and harmful to health and the environment; however, it must not be swallowed or be in contact with the eyes.
  • In case of accidental contact with skin or eyes, immediately rinseit with plenty of water.In case of being swallowed, immediately visit a physician.
  • This material is not inflammable.
  • To get concretewaterproofed, w/c should be considered less than 40%.
Physical state liquid
Color yellow
Specific weight ∼ 1 gr/cm3
Cl None
pH 8.5-9.5
Standard ASTM C494 Type G
Expiry period and storage at least one year, away from freezing and direct sunlight
package 20-lit plastic containers and 220-lit barrels