- covering old and fresh concretes
- Industrial, commercial, educational, and public halls floorings
- Most appropriate cover for food, health, pharmaceutical and chemical industries, and labs floors
EF-100 Epoxy flooring
EF-100 Epoxy flooring is a binary compound produced and offered based on bisphenol A epoxy and polyamine hardener, applicable on any surface such as concrete, steel, rock etc., due to excellent adhesion, in addition to various physical and chemical properties.
There are materials in the composition of EF-100 Epoxy flooring that reduce its concentration, resulting in enhancing its mechanical properties and, due to the high viscosity of the product, causing the increase of EF-100 adhesion to the surface applied.
- High mechanical properties, adhesion, and flexibility.
- Resistant to abrasion, high voltage electricity, various corrosive chemicals, and fire.
- Elegant, glassy, washable, and sterilizable
- Applicable in monolithic form without any expansion joint.
- Totally hygienic, and dust-free in various colors.
Exactly according to the mix design, add a proper amount of the hardener to epoxy resin, and mix them for 2-3 minutes with a low rpm mixer (max. 200 rpm). Then pour the mix on the surface and distribute it with a brush or comb
- Using mask, gloves, and safety goggles is recommended during working with any chemicals.
- Prevent direct and permanent contact of the hardener with the skin.
- In case of being swallowed, immediately visit a physician.
- This material is inflammable and must be kept away from heat and flame.
The appropriate temperature range for the application of EF-100 Epoxy flooring is between 15℃ and 35℃, and considering its short pot life (30-70 min, depending on ambient temperature), only prepare the amount that might be used in this period. The more the volume of the prepared mix, the shorter the pot life will be practically
