CPC-1 is used to protect the surfaces of concrete and metal structures in extreme atmospheric conditions and wet lands containing corrosive salts. The followings are some examples of these structures: potable water tanks, concrete and metal storage silos, concrete tanks, concrete and metal pipes as well as coastal structures in the north and the south of Iran.

– Ready to use, phenol-free, suitable for potable water tanks

– High coating capability

– Relatively rapid drying

– Resistant to brine, acids, alkalis, vapor and gases resulted from burning

– Spray capability on surfaces

– Does not flake and break.

First apply a layer of CPC-1 as primer and, after its complete drying, apply 1-3 additional layers over it. The coating may be applied by a brush or a spray gun. Drying time is about 12 hours in dry weather.

Amount of use:

Concrete surfaces: 300-500 gr/m²

Metal surfaces: 200-400 gr/m²

Avoid direct heating.

Do not use in a closed space and be sure to have a good ventilation in the application place. In case of stiffening due to the cold weather, first warm it by placing in a location with appropriate temperature then use it.